CM362-A100 Series
High Temperature Charge Mode Accelerometer, 650 °F (343 °C), Top Exit Flexible Hardline Integral Cable with 100 mV/g Acceleration Charge Mode Amplifier
Product Features
Accurate Monitoring at High Temperatures. Includes Sensor, Integral Cable, and 100 mV/g Charge Amplifier.
Monitor acceleration or velocity on turbines, boiler feed pumps and compressors at temperatures up to 650ºF (343ºC)
- Flexible, hardline integral cable system ensures that the resistance is controlled and constant to the amplifier providing superior signal quality and reliability
- Integral cable provides optimal reliability by positioning the connector with charge amp a minimum of one meter from measurement point outside of high temperature environment
- Mineral insulated cable, similar to that used with thermocouples, protects conductors from the environment to ensure stable internal resistance levels.
CM362-7A
Hardline Integral Cable
Stock Product
| Specifications | Standard | Metric | |
|---|---|---|---|
| Physical | |||
| Sensing Element | PZT Ceramic | ||
| Sensing Structure | Compression Mode | ||
| Weight | 7.2 oz | 250 grams | |
| Case Material | 304 Series Stainless Steel | ||
| Mounting Thread | 1/4-28 | ||
| Connector (Non-Integral) | 2 Pin MIL-C-5015 | ||
| Resonant Frequency | 1,590,000 CPM | 26500 Hz | |
| Mounting Torque | 2 to 5 ft. lbs | 2,7 to 6,8 Nm | |
| Mounting Hardware Supplied | 1/4-28 Stud | M6x1 Adapter Stud | |
| Calibration Certificate | CA10 |