HVLP302 Series
High Voltage Isolated Molded Loop Power Sensor, 4-20 mA Output Proportional to Vibration in Acceleration, Top Exit 2 Pin Connector
Product Features
10 kV DC (7 kV AC) Electrical Isolation between the base and internal electronics
Stainless Steel Base & Connector
- For Use With CTC Grounded Connectors for Added Noise Protection: A2AG or A2NG
- Transmit Signals Over Long Distances with No Signal Loss
- Outputs to PLC, DCS, SCADA
HVLP302-XXX-1A
2 Pin Connector
| Connector Pin | Polarity |
| A | (+) Loop Power mA Output |
| B | (-) Common |
Built To Order
| Specifications | Standard | Metric | |
|---|---|---|---|
| Environmental | |||
| Operating Temperature Range | -4 to 212 °F | -20 to 100 °C | |
| Electromagnetic Sensitivity | CE | ||
| Sealing | Molded, Fully Encapsulated | ||
| Physical | |||
| Sensing Element | PZT Ceramic | ||
| Sensing Structure | Shear Mode | ||
| Weight | 3.2 oz | 91 grams | |
| Case Material | Polycarbonate | ||
| Mounting Thread | 1/4-28 Blind Tapped Hole | ||
| Connector (Non-Integral) | 2 Pin MIL-C-5015 | ||
| Mounting Torque | 2 to 5 ft. lbs. | 2,7 to 6,8 Nm | |
| Mounting Hardware Supplied | 1/4-28 Stud | M6x1 or M8x1.25 Adapter Stud | |
| Calibration Certificate | CA10 |
Ordering Information
