LP922-XXX-51C Series
Nonincendive, CSA North America Class 1, Division 2 and ATEX Zone 2 Approved Loop Power Sensor, 4-20 mA Output Proportional to Vibration in Acceleration, Top Exit with Flying Leads
Product Features
CSA North America Class I, Division 2, Groups A, B, C, and D; Class II, Division 2, Groups F and G; Class III
Outputs to PLC, DCS, SCADA
- Can be used with IS311-1B Explosion Proof Elbow
- NOTE: Class I, Division 2 / Ex nA IIC when installed using an approved Zone 2 / Division 2 rated cable in accordance with the CEC or the NEC.
LP922-XXX-51C
1/4 inch NPT Mount
| Conductor | Polarity |
| Red | (+) Loop Power mA Output |
| Black | (-) Common |
Built To Order
| Specifications | Standard | Metric | |
|---|---|---|---|
| Physical | |||
| Sensing Element | PZT Ceramic | ||
| Sensing Structure | Shear Mode | ||
| Weight | 12 oz | 340 g | |
| Case Material | 316L Stainless Steel | ||
| Mounting Thread | 1/4 NPT | ||
| Connector (Non-Integral) | Flying Leads | ||
| Mounting Torque | 2 to 5 ft. lbs | 2,7 to 6,8 Nm | |
| Calibration Certificate | Current Output @ 100 Hz |
Ordering Information
