MEB212 Series

High Voltage Resistance, Lightweight Underwater Accelerometer, Top Exit Molded Integral Cable, 10-32 Mounting, 100 mV/g, ±10%
MEB212
CB127 Integral Cable
Conductor Polarity
Red (+) Signal/Power
Black (-) Common
Stock Product
Specifications Standard Metric
Part Number MEB212 M/MEB212
Sensitivity (±10%) 100 mV/g
Frequency Response (±3dB) 30-900,000 CPM 0.5 Hz-15 kHz
Frequency Response (±10%) 60-600,000 CPM 1 Hz-10 kHz
Dynamic Range ± 50 g, peak
Electrical
Settling Time < 2 Seconds
Voltage Source (IEPE) 18-30 VDC
Constant Current Excitation 2-10 mA
Spectral Noise @ 10 Hz 30 µg/√Hz
Spectral Noise @ 100 Hz 4 µg/√Hz
Spectral Noise @ 1000 Hz 2 µg/√Hz
Output Impedance < 100 ohm
Bias Output Voltage 10-14 VDC
Case Isolation >108 ohm
Dielectric Breakdown Voltage 5 kV AC
Specifications Standard Metric
Environmental
Temperature Range -58 to 250°F -50 to 121°C
Maximum Shock Protection 10,000 g, peak
Electromagnetic Sensitivity CE Approved
Sealing IP68 Integrally Molded Cable
Submersible Depth 200 ft. 61 m
Physical
Sensing Element PZT Ceramic
Sensing Structure Shear Mode
Weight 0.35 oz 10 grams
Mounting Base 316L Stainless Steel
Mounting 10-32 UNF
Cable Jacket Diameter 0.14 in (3.6 mm)
Cable Jacket Material Polyurethane
Cable Conductor 26 AWG
Twisted Shielded Pair
Resonant Frequency 2,640,000 CPM 44 kHz
Mounting Torque 1.5 - 2.5 ft. lbs 2,0 to 3,4 Nm
Mounting Hardware 10-32 Stud M5 Stud
Calibration Certificate CA10

Typical Frequency Response

Frequency Response Chart