TA254 Series

Low Cost Dual Output Sensor, Temperature & Acceleration, Side Exit 3 Pin Connector, 100 mV/g, 10 mV/°C, ±15%
TA254-1A
3 Pin Connector
Connector Pin Polarity
A (+) Signal/Power
B (-) Common
C (+) Temperature Voltage
Stock Product
Specifications Standard Metric
Part Number TA254
Sensitivity (±15%) 100 mV/g
Frequency Response (±3dB) 30-600,000 CPM 0,5-10000 Hz
Frequency Response (±10%) 120-300,000 CPM 2,0-5000 Hz
Dynamic Range ± 50 g, peak
Temperature Measurement Range -40 to 250°F -40 to 121°C
Temperature Output 10 mV/°C
Temperature Sensor 750 mV = 25 °C (±1)
Electrical
Settling Time <2.5 seconds
Voltage Source (IEPE) 18-30 VDC
Constant Current Excitation 2-10 mA
Spectral Noise @ 10 Hz 14 µg/√Hz
Spectral Noise @ 100 Hz 2.3 µg/√Hz
Spectral Noise @ 1000 Hz 2 µg/√Hz
Output Impedance <100 ohm
Bias Output Voltage 10-14 VDC
Case Isolation >108 ohm
Specifications Standard Metric
Environmental
Temperature Range -40 to 250°F -40 to 121°C
Maximum Shock Protection 5,000 g, peak
Electromagnetic Sensitivity CE
Sealing IP68
Submersible Depth 200 ft. 60 m
Physical
Sensing Element PZT Ceramic
Sensing Structure Shear Mode
Weight 5.6 oz 160 grams
Case Material 316L Stainless Steel
Mounting 1/4-28
Connector (Non-Integral) 3 Pin MIL-C-5015
Resonant Frequency 1,260,000 CPM 21000 Hz
Mounting Torque 2 to 5 ft. lbs. 2,7 to 6,8 Nm
Mounting Hardware 1/4-28 Captive Bolt M6x1 Captive Bolt
Calibration Certificate CA10

Typical Frequency Response

Frequency Response Chart