SBX42 Series
Fiberglass Enclosure
Stainless Steel Enclosure
DUAL INPUT & OUTPUT VIBRATION SWITCH BOX, STAINLESS STEEL ENCLOSURE, NEMA 4X (IP66) RATED, SENSOR INPUT OPTIONS: 4 TO 8 DUAL OUTPUT SENSOR INPUTS
- Easily Switched Access for Dual Output Sensors
- Internally earth grounded for noise reduction
- -58 to 180 °F (-50 to 82 °C) Temperature Range
COMPLIANCE INFO
California Proposition 65 Statement
China RoHS Compliance Statement
EU Battery Compliance Statement
EU Declaration of Conformity
EU POPs Declaration of Compliance
EU Waste Compliance Statement
PFA Usage Statement
REACH Compliance Statement
RMI Conflict Minerals Compliance Report
RMI Extended Minerals Compliance Report
RoHS Compliance Statement
TSCA Compliance Statement
SB242: Stainless Steel Switch Box
The SB242 standard size, stainless steel switch box is used to convert the three-conductor input wiring of up to 8 remotely installed dual-output accelerometers or piezo velocity sensors to a two switched BNC connectors and one switched two-pin MIL spec connector for portable data collection. Input wiring from each sensor is connected to the outputs via spring cage or screw terminal blocks. Each terminal block includes inputs for signal, temperature, negative and shield. The shield drain wire is earth grounded via the stainless steel enclosure. Additionally, the SB242 comes equipped with built-in online expansion jacks. To utilize this feature, simply purchase JB905-1A (12 position, spring cage plug) or JB905-2A (12 position, screw terminal plug) and connect your output wiring for continuous, live readings. Please note, JB905-1A and JB905-2A are sold separately. One JB905-1A or JB905-2A plug is required per six channels of measurement.
Rated for NEMA 4X (IP66), the SB242 can withstand harsh environments including temperatures ranging from -58° to 180°F (-50° to 82°C). The box is also resistant to hose directed fluid and corrosion. A twist lock is installed on the door allowing the box to be sealed from the elements when not in use.
