MX333 - MX433 Standard Size
Fiberglass Enclosure
Stainless Steel Enclosure
TRIAXIAL INPUT & OUTPUT MAXX BOX, ENCLOSED INDIVIDUAL 4 PIN AZIMA DLI COMPATIBLE CONNECTORS, FIBERGLASS ENCLOSURE, NEMA 4X (IP66) RATED, SENSOR INPUT OPTIONS: 4 TRIAXIAL OUTPUT SENSORS
- Designed for Triaxial Data Collection
- Internally earth grounded for noise reduction
- -58 to 180 °F (-50 to 82 °C) Temperature Range
COMPLIANCE INFO
California Proposition 65 Statement
China RoHS Compliance Statement
EU Battery Compliance Statement
EU Declaration of Conformity
EU POPs Declaration of Compliance
EU Waste Compliance Statement
PFA Usage Statement
REACH Compliance Statement
RMI Conflict Minerals Compliance Report
RMI Extended Minerals Compliance Report
RoHS Compliance Statement
TSCA Compliance Statement
MX333: Fiberglass MAXX Box, Standard Size
The MX333 standard-size, fiberglass-enclosed BNC connection box is used to convert the four-conductor input wiring of up to 4 triaxial accelerometers or piezo velocity sensors to a portable data collection unit. Each sensor is wired to four-pin output connectors compatible with Azima DLI data collector cables. Input wiring from the sensors is wired to the outputs via terminal blocks located behind the hinged output panel. Connections on the terminal strip are clearly labeled for an X, Y, and Z input as well as common and the shield drain wire. The shield drain wire is earth grounded via an external ground stud that is mounted to the side of the fiberglass enclosure. The four-pin connectors on the MX333 enclosure are compatible with CTC’s C592, C540, and C342 connectors. Data collector cables for interface with this enclosure can be built using CTC's Cable Wizard.
Rated for NEMA 4X (IP66), the MX333 Series can withstand harsh environments including temperatures ranging from -58 to 180 °F (-50 to 82 °C). The box is also resistant to hose-directed fluid and corrosion. A snap latch is installed on the door allowing the box to be sealed from the elements when not in use.
