A render of a CTC SB202 extended capacity, stainless steel switch box shown with front lid unlatched.
SB202 Extended Capacity thumbnail image

SBX02 Series Extended Capacity

Fiberglass Enclosure Stainless Steel Enclosure
SINGLE AXIS VIBRATION SWITCH BOX, STAINLESS STEEL ENCLOSURE, NEMA 4X (IP66) RATED, SENSOR INPUT OPTIONS: 24 TO 48 SINGLE OUTPUT SENSOR INPUTS
  • Provides a switched output from remotely installed sensors to a data collector through a BNC and a 2 Pin MIL spec connector
  • Internally earth grounded for noise reduction
  • -58 to 180 °F (-50 to 82 °C) Temperature Range

SB202: Stainless Steel Switch Box, Extended Capacity

The SB202 extended capacity, stainless steel switch box is used to convert the two-conductor input wiring of up to 48 remotely installed single-axis accelerometers or piezo velocity sensors to a switched BNC and a switched two-pin MIL spec connector for data collection. Input wiring from each sensor is connected to the outputs via spring cage or screw terminal blocks. Each terminal block includes inputs for positive, negative and shield. The shield drain wire is earth grounded via the stainless steel enclosure. Additionally, the SB202 comes equipped with built-in online expansion jacks. To utilize this feature, simply purchase JB905-1A (12 position, spring cage plug) or JB905-2A (12 position, screw terminal plug) and connect your output wiring for continuous, live readings. Please note, JB905-1A and JB905-2A are sold separately. One JB905-1A or JB905-2A plug is required per six channels of measurement.

SB202 Extended Capacity diagram

Rated for NEMA 4X (IP66), the SB202 can withstand harsh environments including temperatures ranging from -58 to 180 °F (-50 to 82 °C). The box is also resistant to hose directed fluid and corrosion. Two twist locks are installed on the door allowing the box to be sealed from the elements when not in use.

CTC product comparison chart
CTC corporate logo with a brushed steel texture
7939 Rae Boulevard
Victor, NY 14564 USA
+01 585.924.5900
Send POs To:
[email protected]
Contact a Sales Rep:
[email protected]