MX333: Fiberglass MAXX Box, Extended Capacity

The MX333 extended capacity, fiberglass-enclosed BNC connection box is used to convert the four-conductor input wiring of up to 16 triaxial accelerometers or piezo velocity sensors (for 48 channels of measurement) to a portable data collection unit. Each sensor is wired to four-pin output connectors compatible with Azima DLI data collector cables. Input wiring from the sensors is wired to the outputs via terminal blocks located behind the hinged output panel. Connections on the terminal strip are clearly labeled for an X, Y, and Z input as well as common and the shield drain wire. The shield drain wire is earth grounded via an external ground stud that is mounted to the side of the fiberglass enclosure. The four-pin connectors on the MX333 enclosure are compatible with CTC’s C592, C540, and C342 connectors. Data collector cables for interface with this enclosure can be built using CTC's Cable Wizard.

Rated for NEMA 4X (IP66), the MX333 Series can withstand harsh environments including temperatures ranging from -58 to 180 °F (-50 to 82 °C). The box is also resistant to hose-directed fluid and corrosion. Two snap latches are installed on the door allowing the box to be sealed from the elements when not in use.