SSB3000 - SSB4000

SSB2002 Extended Capacity Stainless Steel Modular Switch Box

The SSB2002 Series stainless steel modular switch box is used to convert the two-conductor input wiring of up to 48 remotely installed single axis accelerometers or piezo velocity sensors to a switched BNC and a switched two-pin MIL spec connector for data collection. Input wiring from each sensor is connected to the outputs via spring cage or screw terminal blocks on the bottom of the module. Each terminal block includes inputs for signal/power, common and shield. The shield drain wire is earth grounded via the stainless steel enclosure. Additionally, the SSB2002 series can be equipped with online expansion terminal strips, which can be selected upon ordering.The unique modular design of this box offers flexibility for expansion if 48 channels are not required for initial installation. Simply purchase addition SSB-MODX. While the channel count of standard SB or JB switch boxes can not be modified after purchase, SSB2002 boxes offer the flexibility to add channels at a later date (if less than 48 inputs are required for initial install). Each SSB-MODX module can accommodate up to 12 channels of measurement. Simply purchase additional terminal blocks to fill your SSB-MODX module, or purchase additional SSB-MODX modules for a maximum of 4 modules per box. Modules are easily din-rail mountable into the enclosure. The SSB2002 series may also be equipped with online expansion terminal strips, which can be selected upon ordering.

Rated for NEMA 4X (IP66), the SSB2002 Series can withstand harsh environments including temperatures ranging from -58 to 180 °F (-50 to 82 °C). The box is also resistant to hose directed fluid and corrosion. Two twist locks are installed on the door allowing the box to be sealed from the elements when not in use.